Posts Tagged scaleway

Testing FreeSWITCH performance on Scaleway C1

The dedicated ARM hosting servers at Scaleway appear to be a decent platform for a mid-sized PBX.

In short, the platform displays the following results in performance tests:

  • OPUS<->PCMA transcoding: 16 simultaneous calls with¬† at about 95% total CPU load and no noticeable distortions.
  • SILK<->PCMA transcoding: 72 simultaneous calls were going without distortions, with average total CPU load at 63%. Higher number of calls resulted in noticeable distortions.
  • G722<->PCMA transcoding: 96 simultaneous calls without distortions, at 76% CPU load, and noticeable distortions for higher numbers.

Read the rest of this entry »

, , , ,


Installing FreeSWITCH on Scaleway C1

Scaleway (a cloud service by offers ARM-based dedicated servers for EUR9.99/month, and the first month free. The platform is powerful enough to run a small or FreeSWITCH server, and it shows nice results in voice quality tests.

These instructions are for Debian Wheezy distribution.

By default, the server is created with Linux kernel 3.2.34, and this kernel version does not have a high-resolution timer. You need to choose 3.19.3 in server settings.

At Scaleway, you get a dedicated public IP address and 1:1 NAT to a private IP address on your server. So, FreeSWITCH SIP profiles need to be updated (“ext-rtp-ip” and “ext-sip-ip” to point to you rpublic IP address).

FreeSWITCH compiles and links “mpg123-1.13.2” library, which fails to compile on ARM architecture.¬† You need to edit the corresponding files to point to “mpg123-1.19.0” and commit back to Git, because the build scripts check if any modified and uncommitted files exist in the source tree. Also the patch forces to use gcc-4.7, as 4.6 is known with some problems on ARM architecture. Read the rest of this entry »

, , , ,