Posts Tagged lte

SIMCom SIM7100E LTE modem

SIMCom SIM7100E is a recent LTE modem released by Simcom. It’s approximately $20 cheaper than Huawei LTE modem, and also it provides USB voice function, so it could be integrated with FreeSWITCH mod_gsmopen module (this needs development).

My set of udev rules and chat scripts is updated with SIM7100E information, and here’s a copy:

cat >/etc/udev/rules.d/99-wwan.rules <<'EOT'
# SIMCom SIM7100
SUBSYSTEM=="tty", ATTRS{idVendor}=="1e0e", ATTRS{idProduct}=="9001", SYMLINK+="ttyWWAN%E{ID_USB_INTERFACE_NUM}"
SUBSYSTEM=="net", ATTRS{idVendor}=="1e0e", ATTRS{idProduct}=="9001", NAME="lte0" 
EOT

cat >/etc/chatscripts/sunrise.SIM7100 <<'EOT'
ABORT BUSY
ABORT 'NO CARRIER'
ABORT ERROR
TIMEOUT 10
'' 'AT+CFUN=1'
OK 'AT+CMEE=0'
OK 'AT+CGDCONT=1,"IP","internet"'
OK '\dAT\$QCRMCALL=1,1'
OK
EOT

cat >/etc/chatscripts/gsm_off.SIM7100 <<'EOT'
ABORT ERROR
TIMEOUT 5
'' 'AT\$QCRMCALL=0,1'
OK AT+CFUN=0
OK
EOT

cat >/etc/network/interfaces.d/lte0 <<'EOT'
allow-hotplug lte0
iface lte0 inet dhcp
 pre-up /usr/sbin/chat -v -f /etc/chatscripts/sunrise.SIM7100 >/dev/ttyWWAN02 </dev/ttyWWAN02
 post-down /usr/sbin/chat -v -f /etc/chatscripts/gsm_off.SIM7100 >/dev/ttyWWAN02 </dev/ttyWWAN02
EOT

 

Advertisements

, , , ,

Leave a comment

Two LTE modems with PC Engines APU3

PC Engines GmbH has recently released a new board, APU3. The difference from APU2 is that two mPCIe slots are suitable for 3G or LTE modems, whereas APU2 had only one such slot. This article explains how to utilize two HUAWEI ME909 LTE modems, and it’s applicable to other modems too.

One of the LTE modems has to occupy the slot which is otherwise usable for mSATA storage. So, the board has to use the SD card for booting, and Voyage Linux is designed for such setup. The scripts in this article are tested against Voyage Linux version: 0.11.0 (Build Date 20170122).

As with APU2, the Linux kernel assigns ttyUSB port numbers randomly, so two ME909 modems produce 10 ttyUSB devices with random numbers which change after a reboot.

The modems have identical serial numbers “0123456789ABCDEF”, and the only thing that allows distinguishing them reliably is the PCI slot number of the corresponding USB controller.

Luckily, APU3 board slots designed for LTE modems, J14 (mSATA/mPCIe 3), and J15 (mPCIE 2), are attached to different USB controllers. The third slot, J16 (mPCIE 1), shares the same USB controller with J15.

USB EHCI Controller at PCI device 00:12.0 is attached to J14, and the controller at 00:13.0 is attached to J15 and J16.

So, the udev rules require a small Shell script that translates DEVPATH variable into the PCI slot and function number, and the resulting string will persistently distinguish the devices attached to USB interfaces in J14 and J15:

cat >/etc/udev/devpath_to_pcislot <<'EOT'   
#!/bin/sh echo ${DEVPATH} | sed -r \
    -e 's,^\/[^\/]+\/[^\/]+\/[0-9af]{4}:[0-9af]{2}:,,' \
    -e 's,\/.+,,' -e 's,\.,,g' 
EOT 

cat >/etc/udev/rules.d/99-wwan.rules <<'EOT'
SUBSYSTEM=="tty", ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="15c1", PROGRAM="/etc/udev/devpath_to_pcislot" SYMLINK+="ttyWWAN%c{1}_%E{ID_USB_INTERFACE_NUM}"
SUBSYSTEM=="net", ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="15c1", PROGRAM="/etc/udev/devpath_to_pcislot" NAME="lte%c{1}"
EOT

After rebooting, you can see “lte120” and “lte130” network interfaces, and devices suitable for configuring modems: “/dev/ttyWWAN120_02” and “/dev/ttyWWAN130_02”. There are few other TTY interfaces for various purposes, as explained in HUAWEI documentation.

, , ,

3 Comments

Novatel E371 WWAN LTE modem for APU

Novatel E371 (also known as Dell DW5804) is sold for less than $30 at Aliexpress, and it’s so far the cheapest 4G/LTE WWAN card suitable for PC-Engines APU.

The initialization is fairly simple, although it was tricky to find the right command (AT$NWQMICONNECT=,,).

cat >/etc/chatscripts/lte_on.E371 <<'EOT'
ABORT BUSY
ABORT 'NO CARRIER'
ABORT ERROR
TIMEOUT 10
'' ATZ
OK 'AT+CFUN=1'
OK 'AT+CMEE=1'
OK 'AT\$NWQMICONNECT=,,'
OK
EOT

cat >/etc/chatscripts/lte_off.E371 <<'EOT'
ABORT ERROR
TIMEOUT 5
'' AT\$NWQMIDISCONNECT OK
AT+CFUN=0 OK
EOT

cat >/etc/network/interfaces.d/wwan0 <<'EOT'
allow-hotplug wwan0
iface wwan0 inet dhcp
    pre-up /usr/sbin/chat -v -f /etc/chatscripts/lte_on.E371 >/dev/ttyUSB0 </dev/ttyUSB0
    post-down /usr/sbin/chat -v -f /etc/chatscripts/lte_off.E371 >/dev/ttyUSB0 </dev/ttyUSB0
EOT

, , ,

2 Comments